TEMPERATURE CONTROLLERS “MV-DC” RANGE |
Many plastic processes require water at temperature slightly higher than the water temperaturewhich is available in the central cooling system.
Very frequently in the same applications a large amount of heat must be removed from the process ( mould or roll) and for this reason the temperature controllers need high cooling capacity.
In order to meet the above requirements in a simple and efficient way two new ranges of
water temperature control units have been introduced:
MV AND DC
Both in the MV range and in the DC range the cooling water is mixed with the process water. The main cooling circuit has to be a closed loop circuit. The two ranges include several models equipped with or without heating elements according to the specific needs.
The combination of a chiller with a MV temperature control unit represents an ideal solution when two different water temperatures are required in a mould. Several MV units connected to one main chiller can be installed next to the processing machines in order to obtain different temperature settings.
Standard equipment:
• Temperature range: up to 50°C (machines without heaters) and up to 90°C(machines equipped with
heating elements)
• Stainless steel pump
• Microprocessor temperature controller with double PID
• Modulating 3 way valve (for MV units) providing high temperature accuracy
Larger units are available on request.
Options:
• Heaters from 3 to 24 kW
• High flow and high pressure pumps
• Flow switch (necessary for units equipped with heating elements)
• Heating elements controlled by Solid State Relays
|
 |
| |
REFRIGERATORI CONDENSATI AD ACQUA WATER COOLED WATER CHILLERS |
| Refrigeratori d’acqua monoblocco a funzionamento automatico di concezione modulare, con condensazione ad acqua. |
|
Modular self-contained water cooled water chillers. |
Modelli con circuito di refrigerazione singolo e un compressore UNI/W, oppure due compressori e due circuiti indipendenti TWIN/W, oppure quattro compressori e quattro circuiti indipendenti: MULTI/W. |
|
Three series of units: with one refrigeration circuit and one compressor: UNI/W; two compressors and two independent circuits: TWIN/W;four compressors and four independent refrigeration circuits: MULTI/W. |
L’assenza di ventilatori riduce l’emissione sonora in ambiente e rende possibile, nella maggior parte dei casi, la sovrapposizione di due unità riducendo gli ingombri al suolo. |
|
Reduced overall dimensions; in most of cases the units can be installed stacked one on top of the other. |
|
 |
Opzioni:
-Versione “T” tropicalizzata
- Pompa in stand - by
- Tensioni speciali
- Versione “MT” per basse temperature |
|
Options:
- “T” Version for hot climates
- Stand-by pump
- Special voltages
- “MT” Version for low temperature
|
|
| |
REFRIGERATORI CONDENSATI AD ACQUA WATER COOLED WATER CHILLERS |
Refrigeratori d’acqua monoblocco a funzionamento
automatico di concezione modulare, con
condensazione ad acqua. |
|
Modular self-contained water cooled water chillers. |
| Modelli con circuito di refrigerazione singolo e un compressore UNI/W, oppure due compressori e due circuiti indipendenti TWIN/W, oppure quattro compressori e quattro circuiti indipendenti:MULTI/W. |
|
Three series of units: with one refrigeration circuit and one compressor: UNI/W; two compressors and two independent circuits: TWIN/ W; four compressors and four independent refrigeration circuits: MULTI/W. |
L’assenza di ventilatori riduce l’emissione sonora in ambiente e rende possibile, nella maggior parte dei casi, la sovrapposizione di due unità |
|
Reduced overall dimensions; in most of cases the units can be installed stacked one on top of the other. |
|
 |
Opzioni:
-Versione “T” tropicalizzata
- Pompa in stand - by
- Tensioni speciali
- Versione “MT” per basse temperature |
|
Options:
- “T” Version for hot climates
- Stand-by pump
- Special voltages
- “MT” Version for low temperature
|
|
| |
| <<BACK |
